Peavey TriFlex II Bedienungsanleitung Seite 27

SUnLIGHT/HEAT
Avoid prolonged exposure to direct sunlight, as this may cause the unit to overheat and thermally shut off.
Excessively hot operating conditions can also cause a thermal shutdown.
Do not store in extremely hot or cold conditions or extremely high humidity. Always allow unit to come to room
temperature before use.
CLEAnInG
®
never clean the TriFlex II while plugged in or turned On! When the unit has been fully disconnected from AC
power sources, use a dry cloth to remove soil or other dirt. never use strong solvents on the TriFlex II, as they
could damage the cabinet. Do not allow AnY fluids to drip inside the TriFlex II.
TOUCHUP
Black touch-up spray paint, such as Peavey's part number 00052110, can be used. To touch-up scrapes or dents
on the cabinet or grille, use a light touch and multiple passes instead of trying to cover things up all at once.
Be careful not to spray the screened labels on the power amp module or the speakers with the paint. Follow all
instructions on the can, and heed all warnings!
CHECK FOR SECURE HARDWARE
After the first few months of use and periodically thereafter, check the hardware of the TriFlex II System for
tightness, including the rear panel screws and the screws that hold the casters to the subwoofer cabinet.
The unit is subject to a great deal of vibration, and this could cause them to loosen with use.