Sleep Mode - Symbol LS7808 Schnellreferenzhandbuch

Quick Reference Guide

Sleep Mode

The scanner automatically enters Sleep mode when it has been inactive
for a specified length of time. The scanner has two levels of sleep: laser
and motor. In laser sleep mode, after ten seconds of inactivity the laser
pulses at a 50% rate, and then drops to 3% after a specified time. In
motor sleep mode, the scanner is programmed to turn off the motor and
the laser.
To wake the scanner from sleep mode, present a bar code at the scanner
window.
Beeper Volume
The scanner emits a short beep when it successfully reads a bar code.
The volume of the beep is changed electronically by a command sent by
the host, or by scanning one of the beeper volume bar codes in the
LS7808 Product Reference Guide. See
Connections
The scanner's ports are at the lower edge of the scanner. Remove the
connection cover to access the ports.
Power EAS
Port Interlock
Port
(Behind
Label)
EAS
RS-232
Auxiliary
Port
Beeper Definitions on page
Secondary
Scanner
Port
Host Port
5
8.
Connector
Cover