BH FITNESS G6140RF Handbuch Seite 8

ELEMENTS OF THE MONITOR.-
A: This display gives a simultaneous
readout of Time; Programs; Speed;
Distance; Incline; Pulse rate and
Calories.
C: The electronic monitor has 6 push
buttons or keys; PROGRAM; MODE;
START/STOP; SPEED Km/h (↨).
E: Slot for safety key.
F: Speed function quick access keys or
buttons (3- 6- 8- 11- 14- 16 Km/h).
g: Safety key.
START/STOPING.-
Plug the unit into a wall socket with an
EARTH terminal and set switch (L) to
position (1), Fig.1.
The safety key (g) must be inserted
into its spot (E) Fig.2, otherwise the
English
machine will not operate. As soon as
the safety key (g) is in place, the
machine will beep and all of the
displays will show a [00:00] value,
indicating that the machine is READY
to be used.
CHANGING FROM
KILOMETRES TO MILES.-
This machine has the option to display
speed in km/h or mph. The factory
setting for the machine is km/h.
To change from km/h to mph follow
these steps:
Unplug the machine from the mains
supply, remove the safety key. Plug
the machine back in.
Press and hold the PROGRAM and
MODE keys at the same time for 5
approximately seconds.
The
corresponds to miles per hour. and
insert the safety key (g) into its slot.
8
speed display (A) "0.6"