Quick Menu Bar; Quick Start; Schedule Settings - Velleman DVR8T4 Schnelleinstieg

Icons for Recording
 manual recording
By default, manual recording is on (
 event recording
The event icons,
and the related record function is on.
 timer recording
When timer recording is on,
 HDD overwrite
By default, the HDD overwrite function is set to ON, and
Note: To disable the overwrite function, right-click to display the main menu in the live view window. Then
select (ADVANCED CONFIG) > RECORD > OVERWRITE.
6.3

Quick Menu Bar

Move the mouse pointer to the left of the screen to extend the quick menu bar and show the functions:
Quick Menu (extended)
6.4 Main Menu
Main menu
Main Menu Structure

QUICK START

V. 01 – 15/01/2019
) when the DVR is powered on and a HDD is installed.
/ / / / /
is displayed on the screen.
GENERAL
TIME SETUP
DAYLIGHT
EaZy*
DVR8T4
, are shown on the display when their respective events occur
is displayed on the screen.
Click to show the channel switch panel and select the
channel you want.
Click to display the playback control panel, and click
to play the latest recorded video clip, or click
to enter the search list.
Switch to the channel you want first, and click
enter the zoom-in mode. In this mode, click and drag
the red frame on the bottom left of the screen to
move to the place you want to see. To exit this
mode, click .
Click to show the power off panel to either halt or
reboot the system.
Click to set the status display, image
QUICK START
settings, and date & time.
SYSTEM Click to set the system configurations.
EVENT INFORMATION Click to enter the event search menu.
Click to set CAMERA, DETECTION,
ADVANCED CONFIG ALERT, NETWORK, DISPLAY, RECORD,
DEVICES, DCCS, IVS & NOTIFY.
Click to set record timer, detection

SCHEDULE SETTINGS

timer, and alarm timer.
CHANNEL TITLE – EVENT STATUS – DATE DISPLAY –
BUTTON CONTROL DISPLAY – MOUSE SENSITIVITY–
RECORD CONFIG
DATE – TIME – NTP SERVER – FORMAT – SYNC PERIOD –
GMT
7
to
©Velleman nv