Playback Control - Velleman DVR8T4 Schnelleinstieg

9.3 Playback
Note: This function is not available for GUEST users.
Click on the quick menu bar to display the playback control panel, and click
video clip, or click to enter the search list.
Refer to the image below:
1 progress bar
2 close
3 information bar
Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the device
will stop playback. For example, if the IPS is set to 30, the recording time should be at least 273 seconds
(8192 images / 30 IPS) for the playback to work properly.

Playback Control

Fast forward
Fast rewind
/ Play/pause
Stop
Slow playback Click once to get 1/4x speed playback, and click twice to get 1/8x speed playback.
Previous /
/
next hour
Repeat
Backup
Event Search
 Click to quickly search the recorded files by event lists: RECORD / MOTION / FULL / SYSTEM, or select
FULL to show all the event logs.
 To quickly search the time you want, select QUICK SEARCH. For more details, refer to the full user manual.
Audio Playback
In playback mode, click
Note: To make a video backup with audio, make sure the camera, which supports the audio function is
connected to the video-in channel and audio-in channel. For example, the audio data from audio channel 1 will
be recorded with the video data from video channel 1.
9.4 Recording IP Camera
1. Add the recorder and IP camera to the network.
2. Move the mouse cursor to the left and click the IP SEARCH menu.
3. The DVR will search the IP camera.
V. 01 – 15/01/2019
4 control bar
5 event search
Increase the speed for fast forward. Click once to get 4x speed forward, click twice
to get 8x speed, etc. Maximum speed is 32x.
Increase the speed for fast rewind. Click once to get 4x speed rewind, click twice to
get 8x speed, etc. Maximum speed is 32x.
Click to play the latest recorded video clip immediately, click again to pause.
In the pause mode, click
frame rewind.
Click to stop the video playback.
Click to jump to the next/previous time interval in an hour, for example,
11:00 - 12:00 or 14:00 - 15:00, and start playing the earliest event video clip
recorded during this whole hour.
Click to set point A and point B in a video clip, and the system will play only the
specified range in that clip.
Click to open the backup menu for video backup.
or on the channel status bar to play or mute audio.
DVR8T4
once to get one frame forward, and click
13
to play the latest recorded
to get one
©Velleman nv