Symbol CS 2000 Kurzübersicht Seite 6

Wall-Mount the Scanner Holder
Clean the mounting
surface with isopropyl
alcohol, wipe lightly, and
let dry. Do not use
household cleaners.
1
Removing the Scanner Holder from the Wall
Grab the removal tab and slowly slide
the tab straight down against the wall,
stretching the tape at least 12 inches
(30cm) until the holder releases from
the wall.
C S
Remove the liner from the
adhesive tape on the back of the
holder. Position the scanner
holder on the wall surface and
press firmly for 30 seconds.
2
2 0 0 0
Wait one hour before
inserting the CS 2000.
1 HOUR
3
6
Insert the CS 2000 in the
holder as shown. Do not drop
the scanner, or it may be
damaged.