Symbol CS 2000 Kurzübersicht Seite 12

Problem
Stored bar code informa- The communication cable is not connected
tion is not transferring to properly.
the PC.
The communication software is not properly
loaded.
The communication software is corrupt.
The PC serial port is not properly configured.
Batteries are dead.
The CS 2000 displays a Memory is full.
solid red LED when the
scan button is pressed.
C S
Possible Cause
2 0 0 0
Check that the cable is properly connected to the scanner and the PC.
Check that the communication software is loaded properly on your PC. Consult your soft-
ware application guide.
Reload the communication software on the PC, following the instructions provided with
the software.
Consult your hardware and operating system user documentation.
Make sure you have new batteries, and that they are properly installed.
Upload the data to the PC or clear the memory (described on page 7).
12
Possible Solution