Sony BKM-39H Installationsanleitung Seite 10

Screws C (4 × 20 mm) (2)
Connecting cable (1)
Side brackets (2)
Screws D (3 × 6 mm) (4)
10
Assembly
Assembly
1
Attach the legs to the bottom of base frames, using the
screws A (4 × 16 mm).
2
Loosen the two screws at the rear of the control unit.
BKM-16R
3
Attach the stay to the rear of the control unit.
(Hook the two slits of the stay to the two screws
loosened in step 2, and then tighten these screws.)
Stay
4
Attach the two base frames to the stay, using the screws
B (4 × 8 mm).
Screw A
Leg
Base frame
Screw B