Herunterladen Inhalt Inhalt Diese Seite drucken
Velleman DVM33 Bedienungsanleitung

Velleman DVM33 Bedienungsanleitung

Mini 3 1/2 digitalmultimeter
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the DVM33! This digital multimeter can be used for transistor, diode and audible continuity testing
and features data hold function. Please read the manual thoroughly before bringing this device into service. If the device
was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
• Do not operate the meter unless the bottom case has been closed as the terminal can carry voltage.
• Inspect the insulation of the test leads and make sure there is no damage to the test leads before using the meter.
• To ensure accurate readings, replace the battery as soon as the battery indicator ( ) appears.
• Set the meter to the suitable function and range before each measurement.
• Tested values over the maximum range of each measurement can cause damages to the meter or electroshocks
to the user.
• To avoid damages to the meter, do not turn the rotary switch during measurement.
• When measuring voltage higher than DC 60V or 30Vrms, pay extra attention to avoid electroshocks.
• Make sure to replace the fuse with a fuse of the same type and rating.
• Do not operate or store the meter under high temperatures or humid conditions.
• Do not modify the internal circuit to avoid damages to the meter and danger to the user.
• Periodically wipe the case with a damp cloth and a mild detergent. Do not use abrasives and solvents.
• The meter is designed to withstand the stated maximum voltages. Do not exceed the stated voltages.
3. Symbols
Low battery
DC current
Diode
Earth ground
Fuse
DVM33
DVM33 – MINI 3 ½ DIGITAL MULTIMETER
AC or DC current
Warning
Buzzer
AC current
Double insulation
- 1 -
VELLEMAN
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Velleman DVM33

  • Seite 14: Einführung & Eigenschaften

    Falls Zweifel bestehen, wenden Sie sich für Entsorgungsrichtlinien an Ihre örtliche Behörde. Danke für den Kauf des DVM33! Dieses Digitalmultimeter kann zum Prüfen von Transistoren und Dioden und zur akustischen Durchgangsprüfung. Es hat auch eine Data-Hold-Funktion. Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch.
  • Seite 15 Sie die Sicherung durch eine mit denselben technischen Daten (F0.3A / 250V (fast) 5 x 20mm, Artikelnummer FF0.3N). 6) Die 10A Eingangsbuchse ist nicht gesichert. Für die Sicherheit muss jede Messung 10 Sekunden oder weniger betragen. Zeitintervalle müssen 15 Minuten oder mehr betragen. DVM33 - 15 - VELLEMAN...
  • Seite 16: Technische Daten

    Grundgenauigkeit ± 1.2% + 10-stellig Eingangsimpedanz 5 Mohm Frequenzbereich 40-400Hz Max. Eingang 750V DC-Strom 2m/20m/200m/10A Grundgenauigkeit ± 1% für 20mA-Bereich Grundgenauigkeit ± 1.2% für 200mA-Bereich Grundgenauigkeit ± 2% für 10A-Bereich Überlastungsschutz Sicherung 300mA, 10A-Bereich, nicht-gesichert DVM33 - 16 - VELLEMAN...
  • Seite 17 Data Hold Hintergrundbeleuchtung Abmessungen 75 x 135 x 38mm Gewicht 190g (mit Batterie) Stromversorgung 9V-Batterie Automatisches Ausschalten Zubehör manuell, Messleitungen, 1 x 9V 6LR61-Batterie Für mehr Informationen zu diesem Produkt, siehe www.velleman.eu. Alle Änderungen vorbehalten. DVM33 - 17 - VELLEMAN...

Inhaltsverzeichnis