Other Information - JVC KD-X176 Schnellstartanleitung

8 Press to exit the setting menu.
Note:
You need to set [SPK/PRE OUT] to [REAR/SUB.W] or [SUB.W/SUB.W] before you can
make the subwoofer level settings.
Illumination Color Setting
1
Press and hold to enter menu settings.
2
Turn the volume knob clockwise to select [COLOR], then press the knob.
3
Press the volume knob if [PRESET] is shown on the display.
4
Turn the volume knob to choose a color, then press the knob.
• [COLOR 01] to [COLOR 49]
• [USER]: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• [COLOR FLOW01] to [COLOR FLOW03]: Color changes at
different speeds.
8
5 Press to exit.

Other Information

For playback operations of AUX source, refer to the INSTRUCTION MANUAL
on the following website: <http://www.jvc.net/cs/car/>
• The availability of each source vary depending on the model.
Note for specifications
Speaker Impedance:
4 Ω — 8 Ω
Operating Voltage:
12 V DC car battery