Controlling The Cd Mechanism; Selecting A Track By Number - T+A CD 1230 R Betriebsanleitung

Controlling the mechanism
   
Selects the previous track during playback.
   
Starts playback, selects the next track during
playback.
   
Fast rewind to search for a particular passa-
ge.
   
Fast forward to search for a particular passa-
ge.
After about 2 seconds the outputsignal is
muted.
During the search process the elapsed time
for the current track is shown on the left-hand
side of the screen. If the search reaches the
start or end of the CD, it halts.
 
 
Ends playback; the screen shows the messa-
ge: 'STOP'.
Opens and closes the CD drawer to STOP
mode.
   
Pressing the   button briefly during
 
playback interrupts the current track; the
screen shows the message: 'PAUSE'.
A second press on the 
pressing the   button, resumes play-
 
back.
If the    button is pressed in STOP 
mode, the machine jumps to the start of the
CD or to the start of the MEMO program, and
the unit switches to PAUSE mode.
   
only F1-remote control handset:
Starts playback.
   
only F1-remote control handset:
Selects the playback mode.
(REP ALL / REP TRACK / REP MIX / REP OFF)
   
This button is used to store a MEMO pro-
gram. If you are operating the menu control
system the   button is also used as a
 
confirmation button (see Special Functions
menu).
  button, or 
39
Selecting tracks by number
   
Numeric buttons
Numeric input for direct selection of a track
   
number.
When you press a numeric button (e. g.
   
  ) the screen shows the message:  
.
.
.
For a period of about 3 seconds a marker
.
flashes. During this time you may
.
press a second numeric button to
•
   
complete a two-digit track number - the
machine plays the selected track imme-
diately.
or press the 
•
assumed to be a single-digit track
number – the machine plays the selec-
ted track immediately.
If you do not press a second button and
•
the 3-second period is over, the input is
assumed to be a single-digit track
number - the machine plays the selected
track.
Note:
Even when the CD drawer is open a track
number can still be entered directly. The
drawer then closes automatically and play-
back starts with the selected track.
   
only F1-remote control handset:
This button switches the phase of the signal
from normal to inverse phase and back.
When you press the 
screen displays
'NORMAL' or 'INVERTED' - for a period of
about one second.
'SELECT 1-'.
 button; the input is
 
 button the
 
the current phase -