Creating A Memo Program; Playing A Memo Program; Erasing A Memo Program - T+A CD 1230 R Betriebsanleitung

Creating a MEMO program

Explanation:
A MEMO program can store up to twenty tracks of a CD
in any sequence, e.g. for making a cassette recording.
The MEMO program can only be created for the CD
currently in the machine. It remains stored in the CD
player until either you erase it or the CD drawer is ope-
ned.
Procedure:
When you insert the CD the screen displays the messa-
ge 'STOP' followed by the total number of tracks on the
CD.
Activate MEMO programming.
•
Hold the    button pressed in for about 1 second 
The screen shows: 'PROG' and a flashing number as an
invitation to enter information.
Hold the   or   button pressed in until
•   
the number of the track you wish to select appears on
the screen after 'PROG'.
Now store the track in the MEMO program by pres-
•
sing the   button briefly.  
Playing back a MEMO program
The MEMO program can now be played back.
Start playback process
•
Playback begins with the first track of the MEMO pro-
gram. While the MEMO program is in progress the
screen shows a letter 'P' in front of the current track
number.

Erasing a MEMO program

Pressing the   button briefly in STOP mode opens  
the CD drawer, and this action erases the MEMO pro-
gram.
A MEMO program can also be erased without opening
the CD drawer:
Activate MEMO programming
•
Hold the   button pressed in for about 1 second
 

 /      button  
The screen message 'PROG' flashes once to confirm
that this track has now been accepted as the first track in
the MEMO program. Select all the other tracks you wish
to include in the same way, storing each by pressing the
 button briefly.   
Note:
The track you wish to select can also be entered directly
using the numeric buttons instead of the 
   buttons. After entering a number you can store 
the track in the usual way by pressing the 
briefly.
When you have stored the 20th track the screen shows
the message 'FULL'. If you enter a further number, the last
stored track - the previous 20th one - will be overwritten.
When you have stored all the tracks you wish to include
the MEMO programming procedure is ended as follows:
• End MEMO programming.
Hold the   button pressed in for about 1 second
 
The screen shows the message: 'STORED' and shows
all the track numbers of the MEMO program you have
just created in the sequence in which you stored them.
While the MEMO program is running, the 
  buttons select the previous and next tracks
 
respectively, but only within the MEMO program.
If you use the fast forward or rewind buttons
 /     and the process runs into a track outside  
the MEMO program, the machine plays the selected
track to the end, then the MEMO program resumes.
The screen shows the message 'PROG' and a flashing
number inviting you to enter information.
Erase the MEMO program.
•
Hold the   button pressed in again for about  
The screen now shows the message: 'CLEAR'
The MEMO program is now erased.
37
 and
 
 button  
 and  
1 second