Axkid Bigkid Bedienungsanleitung Seite 11

Keep this instruction manual for future reference.
Ensure that child car seat is installed in a way where no parts become trapped by movable seats,
car doors, etc.
DO NOT attempt use any part of this child car seat with any other child car seat. Ensure any luggage
or loose objects (e.g. books, bags etc) are secured in your vehicle as they may cause injuries to
passengers in the event of a collision.
DO NOT (except where described in this manual), attempt to disassemble or modify this child car
seat or change the way the vehicle' s seat belts are used.
DO NOT use Axkid Bigkid in the home, or any other non-certified location. It has only been designed
to be used in a car. Ensure that Axkid Bigkid is always secured to the vehicle car seat - even when
not in use.
DO NOT leave a folded down vehicle seat unsecured. In the event of a sudden stop, a loose seat
back could cause the child seat to not perform as intended. Store instruction manual in a safe place
or if existing - in the designated location (J) on the child car seat.
The child car seat must not be used without the textile cover.
NOTICES:
The child car seat must only be used in vehicles which are fitted with a three-point seat belt system
that has been approved by regulation ECE-16 or similar.
A correct fit is likely if the vehicle manufacturer has declared in the vehicle hand book that the
vehicle is capable of accepting a 'Universal ' c hild restraint for this group.
The child car seat is a 'Universal' child restraint; it conforms to regulation ECE-R44/04 for general
use in vehicles. It will fit most, but not all vehicle seats.
This child car seat has been declared 'Universal' under more stringent conditions than those applied
to earlier designs, which do not carry the 'Universal' mark.
Child car seats can mark vehicle seat upholstery. The manufacturer cannot be held responsible for
damage or marking to vehicle seats.
The following situations could be illegal and will void the warranty: a) Any modifications or change
of use of the child car seat that have not been authorized or advised by the manufacturer. b) Any
failure to fit the child car seat in strict accordance with the instructions. The manufacturer accepts
no liability for issues arising from unauthorized modifications, uses or fitting.
Do not use any load bearing points other than those described in this manual.
Please keep this manual safe for any possible queries you may have in the future.
4