Down Button - INVENTOR LV5MLI32-12 Benutzerhandbuch

Operation of buttons
1
ON/OFF
2
MODE
TEMP
3
FAN
4
SLEEP FRESH
5
TURB O SELF CLEAN
LED FOLLO W ME
6
7
Push this button to increase the indoor temperature
setting in 1°C increments to 30°C.

DOWN Button(

Push this button to decrease the indoor temperature
setting in 1°C increments to 17°C.
NOTE: Temperature contol is not available in Fan mode.
8
• Used to restore the current settings or resume
previous settings.
7
• On the first time connecting to the power, if push
8
the SHORTCUT button, the unit will operate on AUTO
SHOR T
CUT
mode, 26°C, and fan speed is Auto.
9
TIME R
• Push this button when remote controller is on,
ON
the system will automatically revert back to the
10
TIMER
previous settings including operating mode, setting
OFF
temperature, fan speed level and sleep feature(if
11
activated).
12
• If pushing more than 2 seconds, the system will
automatically restore the current operation settings
13
including operating mode, setting temperature, fan
speed level and sleep feature (if activated ).
9
Press this button to initiate the auto-on time
sequence. Each press will increase the auto-timed
setting in 30 minutes increments. When the setting
time displays 10.0, each press will increase the auto-
timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the
auto-on time to 0.0.
10
Press this button to initiate the auto-off time
sequence. Each press will increase the auto -timed
setting in 30 minutes increments.
When the setting time displays 10.0, each press
will increase the auto-timed setting 60 minutes
increments. To cancel the auto- timed program, simply
adjust the auto-off time to 0.0
UP Button( )
p
)
q
SHORTCUT Button
TIMER ON Button
TIMER OFF Button
5