Troubleshooting - Master X-15 Benutzeranleitung

▪ Don't exceed this MAX mark when you're adjusting the handlebar post or seat post.
▪
Spinning pedals can cause injury. Pedal speed should be reduced in a controlled manner.
▪
Before using the bike, thoroughly inspect the bike for proper assembly.
▪
A parameter distance of 3 feet / 1meter is required before operating the unit.
▪ User must adjust the seat and handlebars to the user's height requirements. Please be sure the
adjustment knob is locked tight and seat and handlebars are secure.
▪
Do not ride the bike in a standing position.
▪
The bike should only be used for the home. Not meant for commercial use.
▪
Before every use please examine brake pads for signs of wear. Brake pads are susceptible to damage
and should be replaced over time.
▪
This bike is not suitable for therapeutic use. Consult a physician prior to starting an exercise program.
▪
This bike should only be used after a through review of the operation manual and the warning label.
Caution: Consult your doctor before beginning to use the bike. This advice is especially important for those
over 35 or suffering from health problems. Read all of the instructions before using any exercise equipment.
1.1 Trouble shooting
RESISTANCE ADJUSTMENT:
Pedalling resistance is controlled by the tension knob. Properly adjusting the seat will help reducing the risk of
injury and ensure maximum exercise efficiency and comfort. (the most appropriate position while using this
bike is with one pedal in the downward position, while the other leg is slightly bent at the knee.) To adjust the
seat height simply turn the adjustable knob loose, then pull the knob to move the seat up or down to the desire
height (there are different seat height positions for adjustment).
HOW TO LEVEL THE BIKE:
There are 4 knobs under the rear and front stabilizer. Adjust the knob when the bike is not level with the floor.
HANDLEBAR ADJUSTMENT:
There are different handlebar heights that can be adjusted. Please adjust the seat height first then adjust the
proper height of handlebar to match the seat.
BELT ADJUSTMENT:
The belt on your bike has been preadjusted and should not require immediate attention. Continuous use of the
bike may cause the chain to stretch or become loose causing the need for bike adjustments. If so, simply losen
the bolts on both side of flywheel and pull forward until the belt becomes tight.
45
EN