Varian Turbo-V 150HT Bedienungshandbuch Seite 68

WIN R W T
000 X X L START/STOP
001 X X L LOW SPEED [0=OFF / 1=ON]
100 X X L SOFT START [0=NO / 1=YES]
101 X X L DEAT TIME
102 X X L WATER COOLING [0=NO / 1=YES]
103 X X N SPEED THRESHOLD
104 X X N RUN UP TIME (0÷359.999 sec)
106 X X N SPEED ADJUST
107 X X N MODE (0, 1, 2) [FRONT, REMOTE, SERIAL]
108 X X N BAUD_RATE (0-4) [600, 1200, 2400, 4800, 9600]
109 X L PUMP LIFE RESET (TYPE "ON" TO RESET)
200 X N CURRENT [ A]
201 X N VOLTAGE [ V]
202 X N POWER [ W]
203 X N FREQUENCY [ Krpm]
204 X N TEMPERATURE (0÷99) [ °C]
205 X N PUMP STATE (0÷6) [STOP, WAITING INTERLOCK, STARTING, NORMAL, HIGH LOAD,
FAILURE, APPROACHING]
206 X N ERROR CODE (0÷7) [NO ERROR, OVERVOLTAGE, SHORT CIRCUIT,CHECK CONN.,
TOO HIGH LOAD, OVERRIDE, OVERTEMP PUMP, OVERTEMP CONTR.]
207 X L STATE R1 [0=OFF / 1=ON]
208 X L STATE R2 [0=OFF / 1=ON]
300 X N CYCLE TIME
301 X N CYCLE NUMBER
302 X N PUMP LIFE
400 X A CRC PROGRAM LISTING
402 X A CRC PARAMETER LISTING
WIN = Window
R = Read
W
= Write
[0=NO / 1=YES]
(0-999.999) IN MINUTES
(0- 65.535) IN COUNTS
(0-999.999) IN HOURS
T = Type:
L = Logical
N = Numeric
A = Alphanumeric
62
DESCRIPTION
TECHNICAL INFORMATION
87-900-893-01 (C)