Formatting The Datashur Pro; For Windows - iStorage datAshur PRO2 Benutzerhandbuch

Note: When the datAshur PRO
time the drive can accept instructions via the keypad allowing it to be configured with a host of security features. If no key event
happens within 30 seconds, the datAshur PRO
RED LED which then fades out to the Idle state (all LEDs off).
To immediately exit Admin Mode (solid
LED switches to a solid RED
must first be in the idle state (all LEDs off) before an Admin/User PIN can be entered.

39. Formatting the datAshur PRO

After a 'Brute Force Attack' or a complete reset the datAshur PRO
You will need to format the datAshur PRO
To format your datAshur PRO
1. Configure a new Admin PIN - see page 22, section 26, 'How to configure an Admin PIN after a Brute Force attack or reset'.
2. With the datAshur PRO in standby state
2
unlock (blinking GREEN LED).
3. Attach the datAshur PRO
2
4. Click on 'Format Disk'
is in Admin Mode, the
2
will exit Admin mode automatically - the solid
2
BLUE LED), press and hold down the SHIFT (
LED which then fades out to the Idle state. To access the drive contents (data), the datAshur PRO
before it can be used.
2
, do the following:
2
LED), press the KEY ( ) button once and enter New Admin PIN to
(RED
to the computer.
BLUE LED will remain on and solid for 30 seconds only, during which

for Windows

2
will delete all data and the encryption key.
2
www.istorage-uk.com
BLUE LED switches to a solid
) button for a second - the solid BLUE
2
#31