Dentsply Maillefer X-SMART EASY Gebrauchsanweisung Seite 22

4. Disconnect battery connector by pressing connector lever and pulling connector
halves apart as shown in Fig. 15.
6. Remove the new battery from the plastic bag.
7. Connect the new battery (See Fig. 15) by aligning connector lever to mating
connector half. Then push the wires and connector back inside the opening and
place battery inside the compartment (See Fig. 13 and Fig. 14).
8. Close the battery door, and reinstall the screw and plug. Ensure you charge the
battery before use.
PRECAUTIONS
The used lithium-ion battery is recyclable, but its disposal may not be permitted by law in your
location. Return them to your distributor if you are unsure of the proper disposal method.
22
Connector lever
Fig. 15