Auto Reverse Function - Dentsply Maillefer X-SMART EASY Gebrauchsanweisung

5. Auto Reverse Function

To choose the auto-reverse function, use the SELECT button to highlight the auto
reverse field and use the minus [–] or plus [+] button to select the auto reverse mode.
NOTE: The last position used for auto reverse is what will be the default until user
manually changes it.
Auto-Reverse ON
The motor handpiece stops and does reverse when the load reaches the preset
Torque Limit value. The Torque Limit box will show "
the motor handpiece returns to the normal rotation (forward rotation) automatically.
(Fig. 8)
Auto-Reverse ON+OFF
The motor handpiece stops and does reverse when the load reaches the preset
Torque Limit value. The Torque Limit box will show "
the motor handpiece stops. (Fig. 9)
If you want the file to rotate forward again, press the FORWARD button.
If you want the file to rotate in reverse, press and hold the REVERSE button.
". When the load is removed,
". When the load is removed,
Fig. 8
Fig. 9
17