Reading The Display - Dentsply Maillefer X-SMART EASY Gebrauchsanweisung

FORWARD
• The file will turn forward (clockwise, when the file is pointed away from the
operator) when this button is pressed.
• Press and release to turn the motor On and Off. Press and hold for
momentary operation.
• Torque and speed are shown at current setting on display.
REVERSE
• The file will turn in reverse (counter-clockwise, when the file is pointed away
from the operator) when this button is pressed, and will stop when it is released.
• A tone sounds during reverse rotation.
+ / – INCREMENT
When a setting is selected, these buttons will adjust the settings up (+) or down (–).
Pressing and holding the button will make repeated adjustments.
SELECT
When the motor is not running, pressing the SELECT button will highlight the torque,
speed, or auto-reverse box. The function of the selected setting can now be adjusted.
When the motor is running, the SELECT button does not function.

2. Reading the Display

The selected box (torque, speed, or auto-reverse) is highlighted with a blinking
double-square. In Figure 6, torque is selected.
14
Fig. 6