Herunterladen Inhalt Inhalt Diese Seite drucken

PI Q-Motion Q-6 series Kurzanleitung

Positioner

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

MP139EK 4.1.0 07/2019. 0.3
Q-Motion® Positioner
Short Instructions
Q-5xx / Q-6xx
User information
These short instructions contain an overview of the most important safety and handling instruc-
tions for installing Q-Motion® positioners with electric motors with the product numbers specified
above (x: any number).
Subject to change. These short instructions are superseded by any new release. The latest respec-
tive release is available for download on our website.
Downloading and Reading the Manual
The actions during installation, startup, operation, and maintenance require additional information
from the manuals of the positioner and/or the electronics.
Manuals may be titled as follows: "User Manual", "Technical Note".
Downloading the Manuals from the Website:
1. Note the product number on the product (e.g., Q-521.230).
2. Open the website www.pi.ws.
3. If the product was shipped with a data storage device: Log into the website:
a. Click Login.
b. Enter the login data. The login data is in the [...]_Releasenews_[...].pdf file in the Manuals
directory on the product's data storage device.
c. Click Login or press the Enter key.
4. Click Search.
5. Enter the product number up to the period (e.g., Q-521) into the search field.
6. Click Start search or press the Enter key.
7. Click the corresponding product in the list of search results.
8. Click the Downloads tab.
The manuals are shown under Documentation.
9. Click the desired manual and save it.
If you cannot find the manual you are looking for or if you have any questions: Contact our custo-
mer service department via service@pi.de.
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstr. 1, 76228 Karlsruhe, Germany
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws
M O T I O N | P O S I T I O N I N G

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für PI Q-Motion Q-6 series

  • Seite 1 If you cannot find the manual you are looking for or if you have any questions: Contact our custo- mer service department via service@pi.de. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstr. 1, 76228 Karlsruhe, Germany Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws...
  • Seite 2: General Safety Instructions

    MP139EK 4.1.0 07/2019. 0.3 The positioner could be damaged by contami- General Safety Instructions nation or ambient conditions that increase the electrical conductivity. Keep the positioner free of lubricants, dirt, Intended Use condensation, and conductive materials. The positioner is a laboratory device as defined Do not operate a vacuum-compatible posi- by DIN EN 61010-1.
  • Seite 3 <0.1 Ω at 25 A at all protective earth con- If possible, reduce the operating frequency ductor connections. and duration. If ground loops occur, contact the PI cus- Stop the motion immediately if an electron- tomer service department. ics malfunction occurs.
  • Seite 4 10 million steps. disposal of all old PI equipment made available to the market after 13 August 2005. If you have an old device from PI, you can send it to PI free of charge. Companies Physik Instrumente (PI) GmbH...
  • Seite 5: Handbuch Herunterladen Und Lesen

    Wenn das gesuchte Handbuch nicht gefunden werden kann oder Fragen auftreten: Kontaktieren Sie unseren Kundendienst unter service@pi.de. Physik Instrumente (PI) GmbH & Co. KG, Auf der Römerstr. 1, 76228 Karlsruhe, Deutschland Tel. +49 721 4846-0, Fax +49 721 4846-1019, E-Mail info@pi.de, www.pi.de...
  • Seite 6: Allgemeine Sicherheitshinweise

    MP139EK 4.1.0 07/2019. 0.3 Verunreinigungen oder Umgebungsbedin- Allgemeine gungen, die die elektrische Leitfähigkeit erhö- Sicherheitshinweise hen, können den Positionierer beschädigen. Halten Sie den Positionierer frei von Bestimmungsgemäße Verwendung Schmiermitteln, Schmutz, Kondenswasser Der Positionierer ist ein Laborgerät im Sinne der und leitfähigen Materialien. DIN EN 61010-1.
  • Seite 7 <0,1 Ω bei 25 A ist. Wenn möglich, reduzieren Sie die Betriebs- Wenn Brummschleifen auftreten, kontak- frequenz und -dauer. tieren Sie den PI-Kundendienst. Halten Sie bei einer Fehlfunktion der Elek- 5. Halten Sie die Bewegungsplattform fest tronik die Bewegung sofort an.
  • Seite 8: Altgerät Entsorgen

    Führen Sie nach jeweils 10 Millionen Schrit- dem 13. August 2005 in Verkehr gebracht ten eine Wartungsfahrt über den gesamten wurde. Stellweg durch. Falls Sie ein solches Altgerät von PI besitzen, können Sie es versandkostenfrei an PI senden. Gesellschaften Physik Instrumente (PI) GmbH PI miCos GmbH PI Ceramic GmbH &...

Diese Anleitung auch für:

Q-motion q-5 series

Inhaltsverzeichnis