ausdom M07 Bedienungsanleitung Seite 3

c. Next track/V-
d. 3.5mm line-in jack
e. LED indicator
f. Microphone
g. Micro USB interface for charging
4. Charging
ATTENTION: Fully charge the headset before the first
use.
Connect the USB charging cable to any powered USB port
and to the USB jack on the right ear cup. The red LED indicator
will be on while charging. Charge time is typically 2-3 hours for
the first charge and 1-2 hours for subsequent charges. When
the battery is fully charged the red LED indicator will turn off.
Note: You can also use the Wireless function when the unit is
charging, but leaving the M07 on can prolong charging time.
The headset can also be turned off and used with the included
audio cable while charging. This will not affect charge time.
When the battery is low, the red LED will flash. M07 will also
provide a low battery voice notification. Playtime varies according
to volume level and audio content .
5. Powering on and off
a) To power on, press and hold the PLAY/PAUSE button for
approximately 2-3 seconds, the blue indicator light will flash
quickly; it will automatically connect to last connected device.
b) To power off, press and hold the PLAY/PAUSE button for
approximately 3-5 seconds. When turning off, the red LED
light will flash quickly for about 1-2 seconds, then turn off.
6. Pairing with wireless devices
Advanced operation
Note: Before installing this product, please make sure your
computer or laptop has the built-in Wireless feature available.
EN-2