Storing The Electric Kettle; Troubleshooting; Environmental Regulations And Disposal Information - Silvercrest SRWK 2400 A1 Bedienungsanleitung Und Serviceinformationen

SilverCrest SRWK 2400 A1

Storing the electric kettle

1. Allow the electric kettle to cool completely before storing it.
2. Wrap the power cord (2) around the cord wrap under the base (5) and store the electric kettle in a
safe and dust-free place.
3. Store the electric kettle in a dry, dust-free place.

Troubleshooting

If your electric kettle does not work as normal, follow the instructions below to try to solve the problem. If
working through the tips below does not fix the fault, please contact our hotline (see "Warranty
information" on page 15).
Problem
Electric kettle does
not work.
On/Off Switch (4)
not engaging in "I"
position.

Environmental regulations and disposal information

A symbol depicting a crossed-out rubbish bin on a product means it is subject to
European Directive 2012/19/EU. All electrical and electronic devices must be
disposed of separately from household waste at official disposal centres.
Do not dispose of the appliance in household waste or bulky waste collections.
Information on collection points and pick-up times can be obtained from your local
council or waste disposal company.
Dispose of all packaging in an environmentally friendly manner. Cardboard packaging can be taken to
paper recycling centres or public collection points for recycling. Any film or plastic contained in the
packaging should be taken to your public collection points for disposal.
14 - English
Possible causes
The mains plug is not
connected.
The electric kettle is not
switched on.
The appliance has overheated
and the overheating protection
is preventing it from switching
on.
The kettle (7) is not correctly
placed on the base (5).
Remedy
Connect the mains plug to a live wall outlet.
Press the On/Off Switch (4) down into the "I"
position to switch on the electric kettle.
Wait until the electric kettle has cooled down.
Fill the kettle (7) with at least 0.7 litres of water
up to the "0.7L MIN" metal strip located inside
the kettle (7).
Place the kettle (7) correctly on the base (5).