G - Replacing The Fuses - Wirbel SW1 450M ECO Gebrauch Und Wartung

10.1.g - Replacing the fuses (Fig. 22)
WARNING:
Replace the blown fuse with one with the
same amperage.
- Remove the plug (1) from the socket (2).
- Remove the cover (3) to access the fus-
es.
Fuse (4) - 7,5A
Control panel protection.
Fuse (5) - Green 30A
Brush rotation motor protection.
Fuse (6) - Red 40A
Aspirator motor protection
- Put the cover (3) back on.
- In order to replace the fuse (7) on the
positive pole of the battery, do the follow-
ing:
WARNING:
Check that the recovery tank and the
clean water tank are empty.
- Disconnect the plug (8).
- Remove the split pin (9) and lift up the
tanks (10), using the handle (11) until
they are completely overturned.
Fuse (7) - 75A
Battery fuse.
8
1
2
5
4
10
7
EN-25
EN
6
3
9
11
Fig. 22