Operation; A - Checks Before Use; B - Preparing The Machine And Choosing The Cycle - Wirbel SW1 450M ECO Gebrauch Und Wartung

8.1 OPERATION

(Figs. 11-12)

8.1.a - Checks before use

- Check that the exhaust tube (1) of the re-
covery tank is properly coupled and prop-
erly sealed.
- Check that the connector (3) on the
squeegee (4) is not blocked and that the
hose is connected correctly.
- Check that the clean water drain hose (5)
is correctly coupled to the specific sup-
ports and that the tap (6) is on.
- Check the battery charging status; press
button (7), checking the LED indicator
(8).
8.1.b - Preparing the machine and
choosing the cycle (Fig. 11)
- Press switch (7), the instrument lights up
(8) indicating the battery status.
- Release the lever (9) and lower it; the
floor squeegee (4) is lowered.
- Press the pedal (10), disengage it from its
lodging and lift it: the brush/brushes (11)
will be lowered.
Working cycle:
- The machine can perform 4 working cy-
cles:
Drying only cycle:
- In order to perform the drying cycle alone,
press the switch (12). The suction unit will
activate.
Brushing only cycle:
- To only perform the brushing cycle press
switch (13); the brush begins to rotate.
Washing, brushing cycle:
- Press switch (13) to start the brush rota-
tion; press switch (14) to start the water
flow.
Washing, brushing, drying cycle:
- Press switch (12) to start the vacuum,
switch (13) to start brush rotation and
press switch (10) to turn on the water
supply.
12 13
6
11
5
10
EN-15
EN
14
8 7
9
1
3
4
Fig. 11