B - Charging The Battery Using An External Battery Charger - Wirbel SW1 450M ECO Gebrauch Und Wartung

WARNING:
Check that the mains voltage is compat-
ible with the operating voltage of the bat-
tery charger (110-250 VAC, 50/60 Hz).
- Leave the batteries to charge until the
"Green" LED (7) lights up, then remove
the power cable (5) and put it away.
- Reconnect the battery plug (1) to the sys-
tem socket (2).
4.1.b - Charging the battery using an
external battery charger (Fig.
7)
- Move the machine close to the battery
charging station.
- Remove the battery plug (1) from the sys-
tem socket (2).
- Connect the battery plug (1) to the exter-
nal battery charger socket (3).
- Once battery charging is complete, re-
connect the battery plug (1) to the system
socket (2).
1
2
3
EN-11
EN
1
Fig. 7