B - Cleaning The Recovery Water Tank - Wirbel SW1 450M ECO Gebrauch Und Wartung

10.1.b - Cleaning the recovery water
WARNING:
At the end of the washing operations, it
is compulsory to clean the recovery wa-
ter tank to prevent deposits or scaling
and the proliferation of bacteria, odours
or mould.
- Drain the recovery water as shown in the
relative paragraph, positioning the ma-
chine over a drain outlet.
- Take the cover (1) off.
- Remove the partition (2) and wash it us-
ing running water.
- Leaving the hose (3) lowered and the cap
off, pour water into the tank (4) through a
hose, cleaning it until clean water comes
out of the drain hose.
- Clean the level probes (5) using a damp
cloth, taking care not to deform them.
- Replace all the components in reverse
order.
6
tank (Fig. 17)
5
2
4
EN-21
EN
1
3
Fig. 17