Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
(Fig. 7)
When plugging the mains adapter or inserting new batteries, the unit is in stand-by mode or switched
off. The mini alarm is operated by pressing the remote control (turn the transmit window towards the
alarm unit). The remote control has a range of approx. 6m at an angle of 30°. By pressing the remote
control once, the unit is switched on – the green LED will shine and the unit will sound a beep. You may
now leave the covered area within 30 seconds. After 30 seconds, the unit is armed. The green LED will go
off, and the red LED will flash. If a person or any other warm object moves within the covered area, the
unit will switch to the detection mode. It can be switched off by pressing the button on the remote
control within 15 seconds. Otherwise the unit will switch to the alarm mode. The alarm siren can be
turned off with the remote control. Otherwise the siren will stop automatically after 45 seconds. The
unit will stay in the armed mode and can trigger a new alarm.Replace the batteries if the siren becomes
quieter or if the LEDs flash irregularly or they become dim or if the remote control does not operate
correctly.
OFF
red - off
green - off
ACIVATED
red - off
green - on
single beep
ARMED
red - flashes
green - off
DETECTION
red - flashes
green - off
ALARM
red - flashes
green - off
siren acivated
(stops
automatically
after ca. 45
seconds)
press
30 seconds
exit delay
press
OFF
15 seconds
entrance delay
fig. 7
GB
Werbung
Inhaltsverzeichnis
