Sanus VMA302 Handbuch Seite 5

3 Install iPad™
Fit the iPad™ into the mount, bottom edge
fi rst.
1
Press on the rear of the locking tab and
ensure that the tab is fully engaged and the
iPad™ is secure in the mount.
3
6901-002132 <00>
Angle the iPad™ back while pressing back on
the locking tab of the mount. Fit the top edge
2
of the iPad™ under the tab.
4 To Release the iPad™
To release the iPad™ from the mount: fi rmly
hold the iPad™ while pressing back on the
tab to release and remove the iPad™.
5