Open Alarm; Automatic Closure; Maintenance Alarm - V2 AZIMUT Handbuch

9.5 - OPEN ALARM (DEFAULT: 0 – FUNCTION DEACTIVATED)
If this function is activated, the device emits BEEPs for 30 seconds when the door remains open for longer than 10 minutes. The alarm is
repeated every 10 minutes. Close to door to interrupt the alarm.
+
-
-
Press the key,
6
the display shows
9.6 - AUTOMATIC CLOSURE (DEFAULT: 0 – FUNCTION DEACTIVATED)
If this function is activated, the device automatically closes the door after the set period of time.
Prior to closing the door, the device emits BEEPs for 20 seconds.
+
-
-
Press the key,
7
the display shows
30" 60" 90"
Select the desired pause time using the
9.7 - MAINTENANCE ALARM (DEFAULT: 0 – FUNCTION DEACTIVATED)
If this function is activated, the device emits BEEPs when the motor reaches 2000 operational cycles.
This alarm may be useful for scheduling maintenance operations.
To interrupt the alarm , simply press and hold the START button for 5 seconds, or power off the device for several seconds.
+
-
-
Press the key,
8
the display shows
+
-
0
Press the key: flashes
to indicate that the
function is deactivated
+
-
0
Press the key: flashes
to indicate that the
function is deactivated
120" 150" 180"
+ -
and
+
-
0
Press the key: flashes
to indicate that the
function is deactivated
+
Press the key to activate
the function: the display
I
shows
+
Press the key to activate
the function: the display
I
shows corresponding to
30 seconds
210" 240"
keys
+
Press the key to activate
the function: the display
I
shows
- 23 -
+
-
Press the key to save
the settings.
The display shows
+
-
+
-
Press the key to save
the settings.
7
The display shows
+
-
Press the key to save
the settings.
The display shows
+
-
6
+
-
8