Disposal Of The Product; Technical Assistance Service; Eu Declaration Of Conformity; Technical Specifications - V2 AZIMUT Handbuch

1.2 - DISPOSAL OF THE
PRODUCT
As for the installation operations, even at the end of this product's
life span, the dismantling operations must be carried out by
qualified experts.
This product is made up of various types of materials: some can
be recycled while others need to be disposed of.
Find out about the recycling or disposal systems envisaged by your
local regulations for this product category.
Important! – Parts of the product could contain pollutants or
hazardous substances which, if released into the environment,
could cause harmful effects to the environment itself as well as to
human health.
As indicated by the symbol opposite, throwing away this product
as domestic waste is strictly forbidden. So dispose of it as
differentiated waste, in accordance with your local regulations,
or return the product to the retailer when you purchase a new
equivalent product.
Important! – the local applicable regulations may envisage heavy
sanctions in the event of illegal disposal of this product.
1.3 - TECHNICAL ASSISTANCE
SERVICE
For any installation problem please contact our Customer Service
at the number +39-0172.812411 operating Monday to Friday
from 8:30 to 12:30 and from 14:00 to 18:00.

2 - TECHNICAL SPECIFICATIONS

Power supply (V - Hz)
Absorbed power (W)
Lamp (V - W)
Protection fuses (A)
Door area (m )
2
Average speed (mm/s)
Peak force (N)
Nominal force (N)
Working temperature (°C)
Rated Operating Time (min.)
Protection degree
Weight (Kg)
1.4 - EU DECLARATION OF
CONFORMITY AND DECLARATION
OF INCORPORATION OF PARTLY
COMPLETED MACHINE
Declaration in accordance with Directives: 2014/35/UE (LVD);
2014/30/UE (EMC); 2006/42/CE (MD) ANNEX II, PART B
The manufacturer V2 S.p.A., headquarters in Corso Principi di
Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
AZIMUT (*), AZIMUT-120V (*)
Description: electromechanical actuator for garage doors
• is intended to be installed on garage doors to create a
machine according to the provisions of the Directive
2006/42/EC. The machinery must not be put into service
until the final machinery into which it has to be incorporated
has been declared in conformity with the provisions of the
Directive 2006/42/EC (annex II-A).
• is compliant with the applicable essential safety requirements
of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU
Radio Directive 2014/53/UE
Directive ROHS2 2011/65/CE
The relevant technical documentation is available at the national
authorities' request after justifiable request to: V2 S.p.A.
Corso Principi di Piemonte 65, 12035, Racconigi (CN), Italy
The person empowered to draw up the declaration and to provide
the technical documentation:
Antonio Livio Costamagna
Legal representative of V2 S.p.A.
Racconigi, il 01/06/2016
(*) made in extra EU Countries on behalf of V2 S.p.A.
AZIMUT
230~ - 50
100
230 - 25
SOURCE = 2,5A
LIGHT = 2,5 A
8
110
500
350
-20 ÷ +40
4
IP20
10
- 16 -
AZIMUT-120V
120~ - 60
100
120 - 25
SOURCE = 2,5A
LIGHT = 2,5 A
8
110
500
350
-20 ÷ +40
4
IP20
10