Insertion Of Silica Gel - Olympus PT-033 Bedienungsanleitung

Insertion of silica gel

Before sealing the Case, insert the accessory silica gel bag for
prevention of fogging between the bottom of the camera and the
Case.
Pay attention to the orientation.
CAUTION
: • Insert the silica gel all the way at the specified location
and with the specified orientation. When the orientation is
not correct, the silica gel bag will be caught when the
Case is sealed and water leakage will be caused.
• When it is tried to seal the Case with the bag inserted
only part of the way, the silica gel bag will be caught by
the O-ring and water leakage will be caused.
• Once silica gel has been used, the moisture absorption
performance will be impaired. Always exchange the silica
gel when the Case is opened and closed.
E-17