Accessing And Using The Osd Menus - Avocent SwitchView 1000 Installations- Und Bedienungsanleitung

4 SwitchView 1000 Switch Installer/User Guide

Accessing and using the OSD menus

The OSD menus allow you to easily access and edit such features as
server name, setup functions, time-outs, autoscan capabilities and
firmware upgrades. The following table lists basic OSD functions.
Table 1.1: Navigating the OSD menu
To do this:
Activate OSD
Deactivate OSD
Change Value
Select Item
NOTE: The two consecutive ScrLk keystrokes should be pressed within two
seconds and the following command key(s) should also be pressed within two
seconds. Otherwise, the hotkey sequence will not be validated.
Figure 1.3: Main OSD Window (8-port SwitchView 1000 Switch)
The following options will be selectable via the Main OSD window.
Table 1.2: Main OSD Menu Functions
Function
Select server
Edit server name
Use this hotkey sequence:
ScrLk + ScrLk + Spacebar
ESC (Escape key)
Left/right arrow keys
Up/down arrow keys
Description
Use up/down arrow key to navigate and
press PgUp/PgDn to scroll page. Press
Enter to select.
Pressing Insert allows you to change a
server name. Enter confirms the change.