How To Procede If - Lotus PMRDG510 Bedienungsanleitung

Warning! :
Problems and failures may occur even when the appliance is used properly. Here is
a list of the mist probably situations and controls that the operator should perform
to avoid applying to a service centre unnecessarily.
If the problem is not solved after the necessary controls, turn off the appliance
immediately, unplug it, cut off any supplies and apply to a service centre.
DISPLAY MSG
(For gas models)
RESET RESET
RESET RESET
DEFECT/ANOMALY
THE KEYPAD DOES
NOT START
THE VATT MOVEMENT IS
NOT POSSIBLE
THE HEATING SYSTEM
DOESN'T WORK
Instruction manual and use
Kettles PF..
HOW TO PROCEED IF ...
DESCRIPTION
Reset gas heating system.
This signal starts after 4 appliance ignition attempts. If pressing the
key, (it stops lighting), after around 4 min. it lights up again, means
that the burners do not remain on ,so:
Apply to a service centre for assistance.
OPERATION
Verify any cut-off on the electric feed (main switch of the
electrical net).
Verify any accidental pressing of the emergency button,
otherwise:
Apply to a service centre for assistance.
Apply to a service centre for assistance.
Apply to a service centre for assistance.
GB-PMR.G510-DU-01 Pag
9 di 9