Operation - Pettec Antibark Spray Trainer 2.0 Bedienungsanleitung

Operation

Turn on Turn off
The Antibark Spray Trainer 2.0 is equipped with a rechargeable battery. The battery must
be fully charged for initial operation.
Press the power button for 2 seconds to turn on the Antibark Spray Trainer 2.0. The LED
will turn green once. The LED then flashes green every 5 seconds and signals that the
trainer is ready.
If the LED lights up red twice when the trainer is switched on, even though the battery is
charged, the trainer needs to be refiled. To do this, please turn off the trainer again, refill
the trainer with spray and switch it on again.
20