Pettec Antibark Spray Trainer 2.0 Bedienungsanleitung Seite 20

Sensitivity levels
To turn off the Antibark Spray Trainer 2.0, press the power button for 2 seconds until the
LED lights up green several times.
To set the sensitivity of the Trainer, press the Adjust button. The Trainer is factory-set and
ship-ped with the lower sensitivity setting.
As a result, when you press the Adjust button for the first time, the sensitivity level chan-
ges from low to high. This causes the LED to glow red. When you switch back to the lower
sensitivity set-ting, the LED glows green.
21