Pettec Antibark Spray Trainer 2.0 Bedienungsanleitung Seite 26

Charging the Antibark Spray Trainers 2.0
With the aid of the charging cable, fully charge the Antibark Spray Trainer 2.0 until the
LED is permanently lit green. As long as the LED is red and green, the device is not fully
charged.
To do so, open the rubber cover on the underside of the Antibark Spray Trainer 2.0 and
plug the charging plug into the opening provided. Then, connect the USB port to the adap-
ter and plug the charger into a outlet. A full charge cycle takes about 2 hours.
27