Niko 10-845 Wichtige Produktinformationen Seite 48

10-845
4.5. Technical data
Power supply voltage
Input current in standby
Maximum input current
Input / output impedance
Output level 2-wire video signal
Allowable ambient temperature
Housing
Weight
Infrared remote control
Carrier frequency
Signal range
Operating temperature
Storage temperature
Remote control batteries
5. MAXIMUM NUMBER OF SCREEN MEMORIES IN A PARALLEL CONNECTION
In a parallel connection, up to 5 type number 10-845 screen memories may be switched after one another.
6. CONNECTION OF THE MODULE
6.1. Connecting wires
Connect the wires with a small screwdriver, in order not to damage the device.
Allowed cross-section (diameter): 0.08 ... 0.82 mm2 (Ø 0.32 ... 1.0 mm)
Max. number of wires per terminal contact: 2 x 0.8 mm, 3 x 0.6 mm
Extra conductors can be connected using aid terminals.
Only use connection wires from the same material and with the same diameter in a terminal contact.
48
+24 V ± 8 % (power supply and control device)
I(a) = 0.1 mA,
I(P) = 106 mA (in standby)
I(Pmax) = 141 mA
100 Ω balanced
setting possible between -11 dB and +5 dB
from 0.28 Vss to 1.82 Vss (factory setting = 1 Vss)
0 ... +40°C
serial flush-mounting housing 6 TE
180 g
6-wire technique required!
37,9 KHz ± 125 KHz
at least 1 m in open spaces
15° deviation from direction at a distance of 3 m
-10 to +50°C
-20 to +60°C
1 x button cell battery CR2025 (DC3.0V)
EN