Instruction For The Tv Operation; Automatic Search; Manual| Search; Basic Operation - Peiying PY9908 Bedienungsanleitung

12. Instruction for the TV operation

12.1 Search channel
12.1.1 country setting
You can set the country for Menu. Default country is England
a) Enter to the installation menu.
b)Press the [ok] / [RIGHT] button to display the available Country List.
c)Select your desired country using the [UP] / [DOWN] button, and press the [OK] button to
confirm (Figure 1.2 show)

12.1. 2 Automatic Search

a)Use the [UP]/[DOWN] button to select automatic search and press the [OK] button, lnto the
automatic search interlace, Wail while the receiver searches for the channels, this may take a few
minutes,
b) in automatic search period, the progress instructed that the strip will have the search progress
indication, in search period, if will press the [OK] key operation In pause, press [UP]/[DOWN] but-
ton to select Save button and exit
c) if search operation is successfully completed, and the channel does not exist press the [EXIT]
button to select Exit and try to reset the search operation again if necessary.
d) The auto search will complete the program which the automatic demonstration will search in the
left side program tabulation, please choose save and exit menu.

12.1.3 Manual| Search

a) Press me [OK] button and use [UP]/ [DOWN] button to select Manual Search, enter manual
search interface.
b) You can use [UP] /[DOWN] button to select channel and frequency ,press the [OK] button to
enter, you can use [UP] / [DOWN] button to change channel and frequency. (Figure 1. 3 show)
c) Use the [UP]/[DOWN] button to select search button, press the [OK] button to search.
d) When completing Channel Search, press the [OK] button can automatic to save the changes
and display program.

12.2 Basic Operation

This chapter describes functions such as switching channel, volume control, and basic features
for watching programs.
12 2.1 Switching Channel
Pressing the [UP] / {DOWN] button may transform to the neighboring channel on panel.
Using panel's numeric keyboard to be possible to cut directly to the channel which likes.
You can switch channel using the channel list or program guide.
12.2.2 VoIume control
Press the [RIGHT] button to high volume, pressing the [LEFT] button to low volume.
Owner's manual
EN
41