Installation - Fagor FPV3340S Bedienungsanleitung

0.
IDENTIFICATION
Identify the model of your hob ("a", "b", "c",
"d", "e", "f") by comparing the number and
layout of the elements on your appliance with
that shown in the illustrations.
1.

INSTALLATION

1.1 Unpacking the hob. Remove all the
protective materials.
1.2 Insertion into the unit. Always take into
account the details on the characteristics
plate (1.2.1) and the measurements of
the unit into which the hob is going to be
inserted (1.2.2, 1.2.3). If you are not going
to fit an oven beneath the hob, you must
install a protective panel in accordance
with the measures indicated (1.2.4).
Stick the foam joint along the outer edge
of the hob to make it watertight (1.2.5).
Turn the hob over and insert it into the
hole (1.2.6). Secure it to the unit with the
hooks supplied (1.2.7). Do not use non-
removable materials such as silicone.
1.3 Connection to the power supply.
• 220-240 V ~ connections according to
(1.3.1)
• If the type of connection is other than
220-240 V~, remove the cable and
make the connection according to
(1.3.2)
• Total power: ≤ 6.8 kW (according to
model, see product technical sheet).
CONNECTION
220-240 V ~
220-240 V ~
380-415 V 3N~
380-415 V 2N~
This appliance is compliant with
European directives 73/23/EEC and
89/336/EEC.
8
INT. NOMINAL
SWITCH BY
PHASES
≤ 30A
≤ 14A
≤ 11A
≤ 16A
Recommendations: The hob must be installed
by an authorised installer, who shall follow the
manufacturer's instructions and diagrams.
2.
USE
Clay, copper or stainless steel pans can be
used with vitroceramic hobs. Aluminium pans
are not recommended as they may stain the
glass of the hob.
2.1 Selecting the cooking zone. You have
various elements on which to place the
pans. Choose the most suitable one
depending on the size of the pan.
2.2 Turning on the hob. Switch on the
element on which you have placed the
pan by pressing the corresponding
(2.2). A beep will sound, a
and the heating element will be selected
by default.
2.3 Adjusting the heat setting.The heat
setting can be modified with ( ) or ( )
(2.3) as long as the heating element is
selected.
N.B.:When changing the heat setting or
timing, press ( ) and ( ) together to go
0
to .
2.4 Selecting the heating element.To select
a heating element press
element that is already turned on (2.4).
The digit associated with the heating
element will be brighter than the others.
2.5 Turning off a heating element. To turn
off a heating element press and hold the
key of the heating element you wish to
turn off. Three beeps will sound and the
digit will turn off. İf you are going to turn
off the last heating element, four beeps
will sound.
2.6 Locking function (child safety). This
prevents accidental use. Hold down the
selection keys of heating elements 1 and
2 ( ) simultaneously to lock or unlock
the hob (2.6.1). If the hob is locked
appear on pressing any key (2.6.2).
shown when unlocking (2.6.3).
ENGLISH
key
0
will be shown
on a heating
will
is