Parrot ASTEROID Smart Bedienungsanleitung Seite 22

Screen commands
While playing a music track or the radio:
tap the screen to pause / resume
playback or mute the radio ;
slide your finger upw ards to increase
the volume ;
slide your finger
decrease the volume.
While playing a music track (except audio
players connected using a jack / jack cable):
slide your finger to the right to skip to the
next track ;
slide your finger to the left to get back to
the previous track.
Note : If you are using the Parrot ASTEROID
Smart with an audio player connected via
Bluetooth, these commands are only available if
your audio player supports the AVRCP profile
(Audio/Video Remote Control Profile).
22 English
Internet
Warning: Internet connection via a 3G key
requires a subscription offer with a telephone
operator. Using this service can result in
significant
conditions
consumption tracking with your operator.
Parrot disclaims any liability for associated
costs.
Connection w ith a 3G key
Note : Refer to the compatibility section of our
website to see the list of 3G / 4G keys that are
dow nw ards to
compatible with the Parrot ASTEROID Smart.
1. Connect a 3G key
ASTEROID Smart w ith a USB cable.
> A pop-up w ill appear.
Note : To ensure optimum reception quality, do
not connect your 3G key to the back of the
Parrot ASTEROID Smart: use a USB cable to
install the accessory on the dashboard (or any
other unobstructed area).
2. Enter your PIN code using the knob, then
select ENTER. Check the
code
roaming charges. Check
of your subscription
to the Parrot
Memorise PIN
option if you w ould like your PIN
code to be stored each time you turn on
the Parrot ASTEROID Smart.
Note: You will be able to change this setting by
selecting Settings > Wireless and network
settings > Mobile data networks. Among the
the
mobile access devices, select your 3G / 4G key,
and
tap Forget PIN code > Forget.
3. Select your APN (Access Point Name)
from the suggested list. This information
is available in the documentation provided
w ith your 3G / 4G key. If your APN is not
in the list, you can add it by selecting
Settings > Wireless and netw ork settings
> Mobile data netw
4. Among the mobile access devices, select
your 3G / 4G key.
5. Select
Access point > Other > Preset
access points.
6. Wait approximately 30 seconds until the
connection is established. You can also
press the
menus w hile the connection is being
established.
orks.
button and brow se the