Getting Started - Parrot ASTEROID Smart Bedienungsanleitung

Installing the USB cables
Connect the USB cables to the Parrot
ASTEROID Smart. We recommend
connect all audio cables to the Parrot
ASTEROID Smart even if you do not plan on
using them. Route the audio cables to a
suitable location in your vehicle such as the
glove box or arm rest compartment. It may be
necessary to drill a hole in your dashboard to
do so. Avoid using USB extension cables.
Make sure you connect the iPod cable to its
specific USB port. "iPod" is w ritten above it.
To guarantee an optimal reception quality w e
recommend you do not connect your internet
USB key 3G on the Parrot ASTEROID Smart
directly : use the USB cable to install your
device on the dashboard (or any other open
area).
Basic operations
The Parrot ASTEROID Smart faceplate can be
removed to protect your unit from theft. The
Parrot ASTEROID Smart cannot w ork w ithout
its faceplate.
Handle the faceplate w ith care. Do not force
w hile installing or removing it. Keep it aw ay
from sunlight, humidity or high temperatures.
you
To remove the faceplate, hold dow n the
button on the top left and slide it dow nw ards
(diagram H p.11).
To replace the faceplate, insert its magneted
inferior part then press the superior part until
you hear a clic.

Getting started

Home screen
Slide your finger horizontally to the left. You
w ill discover more space for adding functions
shortcuts.
Touch an icon to get to the corresponding
function. Touch the Applications
instance. The list of the available applications
is displayed. Slide your finger dow nw ard to
brow se through the applications list.
Press to get back to previous menu.
Press to get to the home screen.
Press to access the pop-up menu
corresponding to the current application. The
pop-up menu allow s you to change several
icon for
English 17