Setup Information - LG PCS200R Pro:Centric Handbuch

Check the following items before you begin PCS200R installation and setup procedures.
Note: Once the PCS200R hardware is installed and the initial setup is completed,
output parameters are configured in the Pro:Centric server Admin Client. Along with this docu-
ment, it is recommended that you have a copy of the Pro:Centric Server Admin Client User
Guide readily available.
ASI Output (Optional)
__ If the system is using ASI output, install the modulator and upconverter that will receive
the ASI output signal from the PCS200R. Refer to the manufacturer's
documentation.
PCS200R
__ Unpack the PCS200R Pro:Centric server unit and all accessories.
PCS200R Accessories:
__ Select the location for mounting the PCS200R. Ensure adequate ventilation is available.
__ Obtain the necessary attachment hardware to mount the PCS200R chassis in its
targeted location.
__ Plan and install the necessary cabling and network (Ethernet) and AC power access for
the PCS200R. You also will need the following to connect a PC directly to the PCS200R
for system setup purposes: FTDI TTL-USB cable (P/N TTL-232R-5V-AJ).
Refer to the PCS200R Pro:Centric Server Installation & Setup Guide for further
installation and configuration information.
Product documentation is available online at: www.lg.com.
•
AC Power Cord and Adapter

Setup Information

7