LG PCS200R Pro:Centric Handbuch Seite 18

System Setup (Cont.)
(Continued from previous page)
Caution (ASI/RF Output only): For proper system performance, the
Pro:Centric signal level at the TV input (ANTENNA IN) must be between
0 to +7 dBmV. Note that additional equipment may be required to adjust
the signal level.
Caution: When not in use, the RF OUT (0 dBmV) connector must remain
terminated with attached terminator accessory.
13. Configure the ASI/RF or IP output parameters in the Pro:Centric server Admin Client
"RF/IP Configuration" screen. Refer to the Pro:Centric Server Admin Client User
Guide for further information.
Note: By default, the server output is enabled for 256-QAM-B modulation (RF output),
with the data channel set to 75.
14. Check one or more room receivers to make sure all content is properly mapped
and available.
18