Device Description - Beurer TL 41 Touch Gebrauchsanweisung

• If the mains cable of this device is damaged, the device must be disposed of.
• Disconnection from the power supply network is only guaranteed if have you unplugged the plug.
• Do not use the device in the presence of flammable anaesthetic gas connections with air, oxygen or
nitrogen oxide.
• No calibration and no preventive checks or maintenance need to be carried out on this device.
• You cannot repair the device. The device contains no parts that you can repair.
• Do not make any changes to the device without the manufacturer's permission.
• If the device has been changed, thorough tests and checks must be carried out to ensure the continued
safety of further use of the device.
• Store the cable out of the reach of small children, so as to prevent them from becoming entangled in the
cable or from suffocating through strangulation.
• The device is intended for use by the patient themselves. The device and accessories are to be used in
accordance with these instructions for use.
General notes
Important
• Always consult a doctor before using the daylight therapy lamp if you are taking medication such as pain
relief medication, medication to reduce high blood pressure or antidepressant medication.
• Diabetics and people who suffer from retinal diseases must be examined by an optician before using the
daylight therapy lamp.
• Please do not use the device if you suffer from an eye disease such as cataracts, glaucoma, diseases of
the optic nerve or inflammation of the vitreous body.
• Always consult a doctor before using the daylight therapy lamp if you have a strong sensitivity to light or
you are prone to migraine attacks.
• If you have health concerns of any kind, consult your GP!
• Remove all packaging material before using the device.
• Light sources are excluded from the warranty.
• If the device has been in storage or recently transported, allow it to rest for at least two hours at room
temperature before using it.
Repairs
Important
• Do not open the device. Do not attempt to repair the device yourself. This can result in serious injury.
Failure to comply with this instruction will void the warranty.
• For repairs, please contact Customer Services or an authorised retailer.

4. Device description

Overview
1. Fluorescent screen
2. Rear of the device housing
3. ON/OFF sensor
4. Stand
5. Mains part connection
1
2
3
12
5
4