Chicco 123 gro-up Bedienungsanleitung Seite 15

he
Do not bleach
4).
Do not tumble dry
Do not iron
all
Do not dry clean
he
. If
Never use abrasive
ck-
not dry the fabric cover within a dryer, let it dry
without squeezing it. To remove the various sections of
the fabric cover from the child car seat frame, follow the
instructions below:
1. Release the child car seat harnesses from the buckle.
2. Remove the lining from the headrest (Fig. 37).
3. Remove the covers over the headrest (Fig. 38).
car
4. Remove the backrest lining detaching the velcro strips
he
over the headrest (Fig. 39).
ely
5. Start removing the lining from the upper part of the child
oid
car seat (Fig. 40 - 41).
6. Tilt the child car seat to release the elastic straps under
the seat (Fig. 42 - 43).
UP
7. Detach the velcro behind the backrest (Fig. 44).
8. Remove the flap behind the backrest (Fig. 45).
he
To replace the parts of the fabric cover, follow the above
instructions in the reverse order.
HOW TO CLEAN THE PLASTIC OR METAL PARTS
pt
Clean the plastic and coated metal parts with a damp cloth
or-
only. Never use abrasive detergents or solvents.
The moving parts of the child Car seat must
ro-
not be lubricated.
he
CHECKING THE CONDITION OF THE COMPONENTS
It is recommended to regularly check the condition of the
ght
following components to make sure they are not damaged
est
or worn:
• Fabric cover: check that the padding does not come out
fit-
from the seams. Check the condition of the seams: they
ed
must always be intact and undamaged.
• Harness straps: check that the fabric lining is not frayed or
the harness strap worn out in the parts corresponding to
the adjustment strap, crotch, shoulders and harness ad-
justment plate.
lift
• Plastic parts: check that the plastic parts are not worn out,
damaged or faded.
ld.
WARNING! If the child car seat is damaged, deformed or
in
worn out, it must be replaced, as its original safety features
e.
may have been compromised.
hat
STORING THE PRODUCT
When it is not fitted in the car, it is recommended to store
the child car seat in a dry place, away from sources of heat
and to protect it from dust, humidity and direct sunlight.
nd
DISPOSING OF THE PRODUCT
se
When the child Car seat no longer complies with the origi-
ch
nal safety standards, stop using it and dispose of it to an
appropriate collection point. Dispose of it always following
environmental rules and regulations adopted within the
country of use.
detergents or solvents. Do
15