Peddling Assistance; Diagnosis Report; Lighting - Batavus LI-ION Bedienungsanleitung

1.3.4

Peddling assistance

You can switch on the system by pressing the up arrow on the lights button.
When the E-bike is not being used, the peddling assistance and lights will
be switched off automatically after five minutes. The display will be put in the
sleep mode automatically after fifteen minutes and the display will no longer
be shown.
Press the up arrow on the lights button to cancel the sleep mode.
The sleep mode of the display will also be cancelled when the bicycle is
again in motion.
1.3.5

Diagnosis report

If all LEDs flash on the battery pack, first
check whether the battery pack (A) has
been correctly connected to the docking
station (B).
If the LEDs continue to flash, contact your
dealer.
1.3.6

Lighting

The lights (both at the front and rear) are supplied with electricity by the
battery pack and will, therefore, only work when the battery pack has been
installed in the E-bike. The motor will work as a dynamo when the battery
pack is flat. The rear light is fixed to the battery pack.
If the rear light needs to be replaced, we recommend contacting your
certified E-bike dealer.
60
A
60
B
A