Transport - Arjohuntleigh NIMBUS 3 PROFESSIONAL Anwendungshinweise

Cover
Foot End
Soft Foam Sheet
Hard Foam Sheet
For
Nimbus 3 Professional
does not need to be checked.
4. For
Nimbus 3
sensor pad, as follows:
• Unzip the cover on one side of the mattress only.
• Pull the side of the mattress away from the cells.
• The
AutoMatt
between the soft and hard foam sheets.
• Make sure that the
flat and is not "kinked".
• Zip the cover back onto the mattress, taking care
not to trap any cell material in the zip.
RM AL
NO
E OR T
FL AT NSP
TRA
FA ST DE
1
2
3
mattresses, the
5. Leave the ends of the mattress cover free when
profiling the bed.
6. Make sure the CPR control is closed and locked in
position and the Transport control is set to
.
NORMAL
FAST DEFLATE
CPR Control
8
mattresses only, check the
sensor pad is situated under the cells
sensor pad is lying
AutoMatt
Cells
Head End
Hard Foam Sheet
AutoMatt Sensor Pad
is encapsulated and
AutoMatt
NORMAL
1

TRANSPORT

2
3
Transport Control
AutoMatt
AutoMatt
Sensor Pad
NORMAL
TRANSPORT