Megger BM121 Gebrauchsanleitung Seite 4

E.M.C. In accordance with IEC61326 including Amendment No.1
Safety:
insulation to IEC 1010-1(1995) EN61010(1995) to installation Category III*,
300 V phase to earth (ground) and 440 V phase to phase, without the need
for separately fused test leads. If required, fused test leads are available as
an optional accessory. *Relates to transient overvoltage likely to be found in
fixed installation wiring.
Weight:
Dimensions:
Cleaning:
Supplied:
Optional:
Publications
The instrument contains static sensitive devices, and care must be taken in
handling the printed circuit board. If an instrument's protection has been
impaired it should not be used, but sent for repair by suitably trained and
qualified personnel. The protection is likely to be impaired if for example: it
shows visible damage; fails to perform the intended measurements; has
been subjected to prolonged storage under unfavourable conditions, or has
been subjected to severe transport stresses.
NEW INSTRUMENTS ARE GUARANTEED FOR 3 YEAR'S
FROM THE DATE OF PURCHASE BYTHE USER.
N o t e : Any unauthorized repair or adjustment will automatically
invalidate the Wa r r a n t y
Instrument Repair and Spare Parts
For service requirements for M E G G E R ® Instruments contact :-
AVO INTERNAT I O N A L
A r c h c l i ffe Road
Dover
Kent, CT17 9EN
E n g l a n d
Tel: +44 (0) 1304 502243
Fax: +44 (0) 1304 207342
or an approved repair company.
The instruments meet the safety requirements for double
530g (including battery cells)
195 mm x 98 mm x 40 mm
Wipe with a clean cloth dampened with soapy water or
Isopropyl Alcohol (IPA).
ACCESSORIES
- User Guide
- Synthetic zip-up pouch
- Test leads, red probe & black
crocodile clip
- Test lead set
'AStitch in Time'
R E PAIR AND WA R R A N T Y
o r AVO INTERNAT I O N A L
Valley Forge Corporate Center
2621 Van Buren Av e n u e
Norristown, PA 1 9 4 0 3
U . S . A .
Tel: +1 (610) 676-8579
Fax: +1 (610) 676-8625
PART No.
6172-069
6420-132
6220-437
AVTM21-P8B