Siemens Pointek CLS 300 Kurzanleitung Seite 4

The Manual
Pointek CLS 300 is available in two models, analog and digital, and the manual is in 4 parts:
I. Pointek CLS 300 analog/digital introduction: information common to all models
• safety notes, instrument description, installation instructions, and maintenance
II. Pointek CLS 300 analog model:
• temperature specifications, wiring, setup and operating instructions
III. Pointek CLS 300 digital model, standalone unit:
• temperature specifications, wiring, setup and operating instructions
IV. Pointek CLS 300, digital model, unit installed on a PROFIBUS network:
• temperature specifications, wiring, setup and operating instructions
Pointek CLS 300 (analog/digital)
Note: Pointek CLS 300 is to be used only in the manner outlined in this manual, otherwise
protection provided by the equipment may be impaired.
Pointek CLS 300 is a versatile capacitance switch with a high level of chemical resistance;
ideal for level detection of interfaces, solids, liquids, slurries, and foam, and for simple pump
control.
analog version
device
nameplate
Approvals (verify against device nameplate)
• CE, CSA , FM, ATEX
NRTL/C
• Vlarem
• Lloyd's Register of Shipping, categories ENV1, ENV2, and ENV5
Note:
The use of approved watertight conduit hubs/glands is required for Type 4/NEMA 4,
Type 6/NEMA 6, IP68 (outdoor applications).
1.
Appendix A: Approvals
Please see
Page EN-2 Pointek CLS 300 (analog/digital) – QUICK START MANUAL
lid without window
1
.
digital version
lid with window
integral digital display
device
nameplate
optional M12 plug
available
7ML19985QF81